Name: akurudepa 2012 Stella DBA-LA110
Brand: -
Price: 63 USD
Availability: InStock

??�Instructions =???Please read by all means; *Please confirm it with a PC by all means.This product becomes the from Sendai-shi, Miyagi [akurudepa].A place varies according to products in the same exhibitor ID in the Yahoo shopping.[akurudepa] As for the product of igai, bundling becomes impossible.; when can pack it. It becomes the form that an additional charge incurs according to size, weight each time.I send it out on the basis of simple packing to hold down cheaply. It may arrive in paper step BALL, but thank you for your understanding.When I cannot confirm the receipt of money by 3:00 p.m. Please note that it is sent out the next business day. I send it out on Saturdays, Sundays and holidays and do not work.The which some slight wounds, dirts are what there is for in our designated transportation company if I can confirm payment, and is nervous Please refrain from a bid. You look at the image well, and please bid.As Headlight, the valve of Tail Lamp become the expendable suppliesYou think it to be , and please think.It should be a no objection, a no return, a no cancellation basicallyWhen, after we communication, I do not get through for less than seven days As I take the of "I delete it by successful bidder convenience", When may not get communication after the ; a bid and Please waitThe answers to questions, please note on Saturdays, Sundays and holidaysIs it first freight (things more than total three sides 160cm), other Yamato Transport Co., Ltd., Sagawa Express one? It becomes the prepayment . Please note that the transportation company designation is not possible.[the details of the product] : 05005436Part name 2012 Stella DBA-LA110F radiator radiator KFVE 16400-B2312Maker SubaruCar name StellaModel DBA-LA110FModel - classification 16716-9Type 5DHBAge type April, 2012Part name Radiator radiatorOne piece of article model KFVEFull model LA110FGBVFNumber of cars LA110F-0005712Genuine 16400-B2312Shape of the product[Engine model] : KFVE [Transmission method] : CVT ] attached to [ : No fan [maker] : Toe yaw [the mileage] : 123,563km [wound information except the exterior]The parts except the exterior do not have the wound information basicallyAmong them "the shape of the product"->I may specify it in "other information".As there is the notation which does not obey "a viewpoint of the wound information", please refer when it is unknown.[viewpoint of the wound information]???The viewpoint of the wound information of this product, please confirm following figure/indication example/explanation.??? The information of the wound is written from Left by a bad turn of the degree.??? In the position of the wound, please see the following "positional information of the wound".??? As for the viewpoint of a kind, a point, the volume of wound, a separate table look at "a kind, a point, the volume of wound".[positional information of the wound]Diagrammatical viewExplanation [common position image][kind, point, volume of wound]SignKind of the woundDefinitionADentThe wound that sheet metal (including the pate case) repair needs basically(including the small dent such as the dimple)AAConvexWound of the umbonation pushed up by the backs such as panel productsAHSharpen; a woundIt is the state with the wound to the groundwork as well as paintwork (the wound that I rubbed a bumper with bricks, and there was)ACRust dent woundThe state that I wear it, and the painting detachment part of the important point is rusted of the dent(the wound that the painting of the dent point comes off, and gets rusty)AGColor bare patch dent woundThe state that I wear it, and the painting of the important point comes off of the dent(mischievous wounds with a wound, the key that the painting of the dent point comes off)AMI compromise and turnThe wound that is in condition that a part of an edge and the CAD is broken with a panel product and bendsBScratch AIt is just available even if I do not paint it for the wound on the thin line again(wound going out by a compound, buff finish)HScratch BThe wound that the painting is necessary for a scratch on the paintwork(state on the skin of the panel without the damage)CRustThe wound that the painting comes off, and gets rustyDOff-and-on holidaysWound to approximately 0.5mm included in glass and lenses by off-and-on holidaysMDOff-and-on holidays (the inside)Wound approximately 0.6mm - 1mm included in glass and lenses by off-and-on holidaysLDOff-and-on holidays (very much)Wound approximately 1.1mm - 2mm included in glass and lenses by off-and-on holidays(stepping stone wound to do crazing, and not to do)DGBare patch off-and-on holidaysThe wound that the painting comes off on a radiator grille or a panel by off-and-on holidaysESheet metal repair traceThere is sheet metal repair before(sheet metal trace, judging from a multi-angle, to finally understand without knowing it at first glance)EESheet metal traceThere is sheet metal repair beforeFSharpnessWound (crack wounds such as installation parts) that I cut in a bumper or a fenderGTear off the paintingWound (state without a dent, a wound, rust) that only paintwork comes offJWiper woundScratch (thing to see with rays) with the wiper bladeJBLight wiper woundScratch (wound outstanding a little) with the wiper bladeJHDeep wiper woundScratch with the wiper armSSSeal signboardThe state that sticks company names on doors with a seal or a stickerPSCoating signboardThe state that paints company names at doorsPYI tan and fadeA lens surface fades with lightsThe state that the surface is discolored with a panel product, and fadesPGTear off clearThe thing which is in condition to be able to tear off lights, the clear coat in the panel product.But the thing which does not go for a thing, car inspection coming off over the entire surface is registration impossibility.WVWavinessI wave, and the surface is in a condition with urethane bumpersPKThe painting crackBumpers are the wounds that the paintwork cracked by a collisionPTTouch penThe state that I touched a panel or a bumper on the wound that there was and paintedPointDefinitionCADCornerLineIn a press lineMallMallEdgeRelationshipThe backThe backsideSizeIndication exampleCircleI display the diameter of the round range in cmcmLinear lengthxRange indication of wide cm X length cmkeThe number??�It is = about security ??? I serve as a reference and do the Genuine Item Number. Please confirm it in each dealer -.??? I fit in us and confirm it and am limited to the product which can confirm conformity.??? With the error that is apparent to information (such as a position, rust, the deterioration of the cosmetic wound In the case of some differences, it is excluded)??? When I can have notification in within seven days from shipment??? When information has few damage at the time of the arrival of the product??? When the product is real another thing???I must be able to hear from you within one week from the arrival of the product Please note that it becomes outside security . [ contents]???I prepare a substitute at the same level as possible.???Of the substitute when there is not it, refund us an amount of money that was expected to pay.??� Our , holiday =??? 9:00-17:00??? is impossible on Saturday, Sundays and holidays on a holiday??? As I tell you separately about GW, the consecutive holidays of the tray for New Year holidays, please see that.[spl]