Name: H31 age Audi Q3 2.0TFSI Quattro 8 U ABA-8UCULB Rear bumper reinforcement 8U0807309D [ZNo:06005107]
Brand: -
Price: 124 USD
Availability: InStock

This product is a large product. To the house cannot deliver it. ï¼Important matter =ãƒ» I compiled instructions when I had you trade our product. I have you read before a bid carefully and seem to bid after having had you agree I would like.ãƒ» The inquiry should be only by an email. Please refrain from the inquiry over the telephone.ãƒ» I issue a qualified bill. I bundle it with a product and send it out.ãƒ» A consumption tax is imposed with a product amount of money. It becomes the road according to product amount of money ( ) +.ãƒ» The packing material charges for transport accident prevention are included in the of mention, too. I do not perform the .ãƒ» Air backgrounds (inflater, wiring, sensors) for product explanation When there is not a mention, it is not attached.ãƒ» This product becomes the first freight, the prepayment of FUKUYAMA TRANSPORTING. I appoint the transportation company in us by the destination area. â˜†FUKUYAMA TRANSPORTING ... Hokkaido, , Kanto (Saitama, Tochigi), the central part ( ) â˜†First freight ... Kanto, Shinetsu, Hokuriku, central part, Kansai, Chugoku, Shikoku, Kyushu, Okinawaãƒ» I do not cope with product receiving by a visit. I do not cope with direct trade, gyohan, the goods confirmation either.ãƒ» As it is , it should be a no objection, a no return, a no cancellation.â–  â–  The first freight, instructions in case of the in FUKUYAMA TRANSPORTING â–  â–  Because the delivery to the -like house becomes impossible in first freight, FUKUYAMA TRANSPORTING, Please inform me of the top that had you choose an address of either following. â‘  to company of the work of successful bidder â‘¡ of the nearest first freight, FUKUYAMA TRANSPORTING Office custody â‘¢ to plate plants performing parts installationâ€»â‘¡I appoint a case, the transportation company of this in us by the destination area. (when other transportation companies is near, I do not cope with a change concerning .) â€»â‘¢The notification to person in charge of the factory performing a case, installation of this You, please.ãƒ» An address in the case of supplier in a column and the full name column of the address "a company name" and "a corporation name" As when it is not input, I judge that it is a -like house, I hope that I have you specify it by all means.ãƒ» When I cannot confirm the receipt of money by 3:00 p.m., it is sent out the next business day.ãƒ» A big game product, the heavy goods product do not ship Saturday. It is sent out the next business day.ãƒ» As for Okinawa, the remote island local , I would like an inquiry to us.ãƒ» I do not initialize the product. Initialization, , the coding You would cope in Diller, repair shop, and please confirm it beforehand.ãƒ» Toyota Nissan Honda Suzuki Daihatsu Mazda car is available for the conformity confirmation. â€»I cannot confirm conformity in us such as Engine, Transmission of the Honda Suzuki There are the parts, too. I would like conformity confirmation in dealer.) In addition, as for foreign country, the import vehicle, I would like confirmation to Diller.â€»â€» When transcribes it into or -, I would like an inquiry of the .â€»â€» As there is the custody district in some areas in Kyoto-shi, please confirm it. â€»â€» The packing material charges for transport accident prevention are included in the of mention, too. I do not perform the . Please understand it.â€»â€» Please regard expendable supplies as exchange required as needed.[the details of the product] : 06005107Part name H31 age Audi Q3 ABA-8UCULB Rear bumper reinforcement 8U0807309DMaker AudiCar name Audi Q3Model ABA-8UCULBModel - classification 18088-11Type 5DSUVAge type January, 2019Part name Rear bumper reinforcementFull model 8UCULCNumber of cars WAUZZZ8U4JR102999Genuine 8U0807309DShape of the product[grade] : 2.0TFSI Quattro [materials] : Steel [the mileage] : 50,661km [viewpoint of the wound information]ãƒ»The viewpoint of the wound information of this product, please confirm following figure/indication example/explanation.â€» The information of the wound is written from Left by a bad turn of the degree.â€» In the position of the wound, please see the following "positional information of the wound".â€» As for the viewpoint of a kind, a point, the volume of wound, a separate table look at "a kind, a point, the volume of wound".[positional information of the wound]Diagrammatical viewExplanation [common position image][kind, point, volume of wound]SignKind of the woundDefinitionADentThe wound that sheet metal (including the pate case) repair needs basically(including the small dent such as the dimple)AAConvexWound of the umbonation pushed up by the backs such as panel productsAHSharpen; a woundIt is the state with the wound to the groundwork as well as paintwork (the wound that I rubbed a bumper with bricks, and there was)ACRust dent woundThe state that I wear it, and the painting detachment part of the important point is rusted of the dent(the wound that the painting of the dent point comes off, and gets rusty)AGColor bare patch dent woundThe state that I wear it, and the painting of the important point comes off of the dent(mischievous wounds with a wound, the key that the painting of the dent point comes off)AMI compromise and turnThe wound that is in condition that a part of an edge and the CAD is broken with a panel product and bendsBScratch AIt is just available even if I do not paint it for the wound on the thin line again(wound going out by a compound, buff finish)HScratch BThe wound that the painting is necessary for a scratch on the paintwork(state on the skin of the panel without the damage)CRustThe wound that the painting comes off, and gets rustyDOff-and-on holidaysWound to approximately 0.5mm included in glass and lenses by off-and-on holidaysMDOff-and-on holidays (the inside)Wound approximately 0.6mm - 1mm included in glass and lenses by off-and-on holidaysLDOff-and-on holidays (very much)Wound approximately 1.1mm - 2mm included in glass and lenses by off-and-on holidays(stepping stone wound to do crazing, and not to do)DGBare patch off-and-on holidaysThe wound that the painting comes off on a radiator grille or a panel by off-and-on holidaysESheet metal repair traceThere is sheet metal repair before(sheet metal trace, judging from a multi-angle, to finally understand without knowing it at first glance)EESheet metal traceThere is sheet metal repair beforeFSharpnessWound (crack wounds such as installation parts) that I cut in a bumper or a fenderGTear off the paintingWound (state without a dent, a wound, rust) that only paintwork comes offJWiper woundScratch (thing to see with rays) with the wiper bladeJBLight wiper woundScratch (wound outstanding a little) with the wiper bladeJHDeep wiper woundScratch with the wiper armSSSeal signboardThe state that sticks company names on doors with a seal or a stickerPSCoating signboardThe state that paints company names at doorsPYI tan and fadeA lens surface fades with lightsThe state that the surface is discolored with a panel product, and fadesPGTear off clearThe thing which is in condition to be able to tear off lights, the clear coat in the panel product.But the thing which does not go for a thing, car inspection coming off over the entire surface is registration impossibility.WVWavinessI wave, and the surface is in a condition with urethane bumpersPKThe painting crackBumpers are the wounds that the paintwork cracked by a collisionPTTouch penThe state that I touched a panel or a bumper on the wound that there was and paintedPointDefinitionCADCornerLineIn a press lineMallMallEdgeRelationshipThe backThe backsideSizeIndication exampleCircleI display the diameter of the round range in cmcmLinear lengthxRange indication of wide cm X length cmkeThe numberï¼Instructions =ãƒ» A slight wound, the number which is nervous as there is it including the dirt that a mention does not have for Please refrain from a bid. You look at the image well, and please bid.ãƒ» The image extracts it and picks you up. On the part which do not copy in a photograph generally the wounds There is other it.ãƒ» I do not accept the objection such as not being able to use it that a state has bad than I thought either.ãƒ» It is all with the thing of the image. About a valve and the expendable supplies Please consider it as a service product.ãƒ» A door, a fender, the bumper come to need sheet metal, pate repair. In addition, the parts which I do not copy in a photograph include a wound or a dent generally.ãƒ» As, with the improvement of the painting technology, a judgment of the re-painting becomes difficult, Please regard the panel thing as re-coating equipment.ãƒ» Expendable supplies, the deterioration parts (resin parts, gomme parts, seals, bearing) It accompanies it for product protection, but asks for exchange basically.ãƒ» Packing and the ceiling become the exchange premise.ãƒ» When, after our communication, I do not get through for less than seven days As I take the of "I delete it by successful bidder convenience", When may not get communication after the ; a bid and Please wait.ãƒ» The answers to questions, please note on Saturdays, Sundays and holidays.ãƒ» The person who cannot fill in one, the which cannot understand an explanation, The one that one, Japanese which Japanese cannot speak cannot understand does not bid I pray for yonio. (a case canceling from this a mat Please note that you are)ï¼It is = about security ãƒ» I fit in us and confirm it and am limited to the product which can confirm conformity.ãƒ» With the error that is apparent to information (such as a position, rust, the deterioration of the cosmetic wound In the case of some differences, it is excluded)ãƒ» When I can have notification in within seven days from the arrival of the productãƒ» When information has few damage at the time of the arrival of the productãƒ» When the product is real another thing â€»â€»I must be able to hear from you within less than seven days from the arrival of the product Even if , a shape difference happen in any case As it becomes outside security , please be careful. [ contents]ãƒ» As, for , the substitute cannot prepare; by returned goods, the refund is coped. The security except the product including an exchange wage, the fee is not possible at all.ï¼ Our , holiday =ãƒ» 8:30-17:00ãƒ» Saturday is no fixed holiday, etc. consecutive holidays on Sundays and holidays on a holiday (please confirm it in store information, a store self-introduction sentence about the consecutive holidays.)[spl][spl]